PAGE 4
installation guide.
To start using your Radenso XP radar detec-
tor, follow these easy steps:
1. Slide the windshield mounting bracket
into the QuickMount slot at the front of
the radar detector.
2. Insert the RJ11 connector of the power
cord into the power jack of the Radenso
XP, located on the left side. Insert the
12V plug into the power socket of your
vehicle.
3. Once connected to a 12V power source,
the radar detector starts up with a very
brief startup sequence.
4. Adjust the volume setting by pressing
and holding the
VOL-/CITY
or
VOL+/
MARK
button for 2 seconds.
1. Connect the radar detector to a Win-
dows-based PC via the included mini-
USB cable and use the Firmware Update
Manager program which will update both
the firmware and the red light/speed
camera database on your Radenso XP.
2. The Firmware Update Manager program
can be found on the Radenso website
at
http://radenso.com/support
, or by
clicking
Support from the Radenso
homepage.
Quick Start Up Guide
Firmware and Database Update
