EN
22
6.
CONFIGURATION MENU
The
“
Configuration Menu
”
is available only in Complete Mode.
All the settings of the N-Com system are managed in this mode.
To access the Configuration Menu starting with the N-Com switched on, press and hold the
“
”
and
“
”
keys simultaneously for 4 seconds, until the red LED light appears.
Once in the “Configuration” menu, press the “
”
and “
”
keys to scroll through the various menu
items.
In the items marked with an “
*
”, it is possible to e
nable / disable the function by pressing
the “
n
” key to
confirm.
The following items make up the “Configuration” menu:
A.
Speed dial* (chapter 9.1)
B.
Smart Navi System* (chapter 9.3)
C.
Auto Off*(chapter 4.3)
D.
Audio boost*
By enabling the “Audio boost”
, all the audio sources inside the device will be reproduced at a
higher and potentially less clear volume.
Press the “
n
” confirmation key to enable / disable the function, which
is not enabled by default on
the device.
E.
Language
To change the language in which the system provides voice prompts, please see section 4 of the
Manual.
F.
Reset
In order to restore the factory settings of the device, press the “
” or “
”
key until you hear the
vo
ice message “
Factory Reset
”.
Press the “
n
” confirmation key to restore all the fact
ory settings of
the device. The system will shut down automatically.
G.
Exiting the configuration
To exit the “Configuration” menu, press the “
” or “
”
key until you hear the voice prompt
“
Exit
configuration
”.
Press the “
n
” confirmation key to exit the “
Configurat
ion” menu.
If n
o key is pressed within 15 seconds, the device automatically exits the “Configuration” menu.