EN
10
•
Prior to installing the N-Com system, remove any filling foam material, if present, from the helmet
(refer to the user manual for your specific helmet).
Option 1
Option 2
N.B.: Keep the filling material in case you wish to use the helmet without the N-Com system in the
future.
3.3.
Installing the B602 system on the helmet
Fig. 5
•
Hook up the microphone connector (blue) to
the other end, following the directions of the
arrows (Fig. 5).
N.B.: You can adjust the position of the
microphone. For instructions on how to do this,
please see chapter. 3.4.
Fig. 6
•
Insert the left-hand cable (attached to the
keypad) into the port, as shown (Fig. 6).