8
VPS operation
The VPS mechanism allows activating the sunscreen by simply lowering it until it partially covers the visor field of vision. In this
way, the desired light transmittance reduction is achieved. At any time, independent of the visor, the VPS can be deactivated
with a simple movement and easily pulled up to restore the normal conditions of visibility and protection guaranteed by the
approved helmet visor.
To activate the VPS, push the slider forward (Fig. 9 A) until you hear the click, which means the slider and VPS are correctly in
place.
To activate the VPS, push the slider towards the back of the helmet (Fig. 9 B) until you hear the click, which means the slider
and VPS are correctly in place.
Precautions For Use
The current approval standards (ECE22-05) state that the visor minimum light transmittance levels must be greater than 80%
when riding at night and not less than 50% when riding during the day. For this reason, under particularly bright weather con-
ditions, e.g. very strong sunlight caused by high intensity and/or incidence of the sunbeams, the use of sunglasses - which
entail a transmittance much lower than 50% - turns out to be advisable, if not absolutely necessary. This in order to reduce eye
fatigue on long trips. Sunglasses also reduce the risk of direct dazzling as opposed to the use of mere approved helmet visors.
However, the use of sunglasses makes it difficult to perform emergency manoeuvres when the maximum visibility range of the
helmet visor must be quickly restored. Just think, for example, of what happens when you enter a tunnel or when unexpected
changes in environmental brightness occur. Thanks to its operating mechanism, the VPS makes these operations much easier.
WARNING!
-
Sunshield does not comply to AS1609.
-
The VPS can be used only during the day and under the environmental conditions described before.
-
At night and/or in conditions of scarce visibility, the VPS MUST be deactivated.
-
Always check that the VPS is properly positioned according to the different weather/environmental conditions and/or to the
above mentioned recommendations for use.
-
We recommend using the VPS only and solely together with the approved standard visor, which has a transmittance value
greater than 80%.
-
The VPS doesn’t replace the protection guaranteed by the visor.
8
VPS operation
The VPS mechanism allows activating the sunscreen by simply lowering it until it partially covers the visor field of vision. In this
way, the desired light transmittance reduction is achieved. At any time, independent of the visor, the VPS can be deactivated
with a simple movement and easily pulled up to restore the normal conditions of visibility and protection guaranteed by the
approved helmet visor.
To activate the VPS, push the slider forward (Fig. 9 A) until you hear the click, which means the slider and VPS are correctly in
place.
To activate the VPS, push the slider towards the back of the helmet (Fig. 9 B) until you hear the click, which means the slider
and VPS are correctly in place.
Precautions For Use
The current approval standards (ECE22-05) state that the visor minimum light transmittance levels must be greater than 80%
when riding at night and not less than 50% when riding during the day. For this reason, under particularly bright weather con-
ditions, e.g. very strong sunlight caused by high intensity and/or incidence of the sunbeams, the use of sunglasses - which
entail a transmittance much lower than 50% - turns out to be advisable, if not absolutely necessary. This in order to reduce eye
fatigue on long trips. Sunglasses also reduce the risk of direct dazzling as opposed to the use of mere approved helmet visors.
However, the use of sunglasses makes it difficult to perform emergency manoeuvres when the maximum visibility range of the
helmet visor must be quickly restored. Just think, for example, of what happens when you enter a tunnel or when unexpected
changes in environmental brightness occur. Thanks to its operating mechanism, the VPS makes these operations much easier.
WARNING!
-
Sunshield does not comply to AS1609.
-
The VPS can be used only during the day and under the environmental conditions described before.
-
At night and/or in conditions of scarce visibility, the VPS MUST be deactivated.
-
Always check that the VPS is properly positioned according to the different weather/environmental conditions and/or to the
above mentioned recommendations for use.
-
We recommend using the VPS only and solely together with the approved standard visor, which has a transmittance value
greater than 80%.
-
The VPS doesn’t replace the protection guaranteed by the visor.
Содержание N91 EVO
Страница 32: ...Fig 1 Fig 2 Fig 3 Fig 4 Fig 5 32 32 A B1 B2 Fig 1 Fig 2 Fig 3 Fig 4 Fig 5 A B1 B2...
Страница 33: ...Fig 6 Fig 7 Fig 8 Fig A Fig B MIN MAX 33 33 Fig 6 Fig 7 Fig 8 Fig A Fig B MIN MAX...
Страница 34: ...Fig 14 Fig 13 Fig 15 Fig 9A Fig 9B 34 34 Fig 14 Fig 13 Fig 9A Fig 9B Fig 15...
Страница 35: ...Fig 12 Fig 10 Fig 17 Fig 18 Fig 16 35 35 Fig 11 Fig 12 Fig 10 Fig 17 Fig 18 Fig 11 Fig 16...
