NOKO NOKOFORZA 2022, Руководство пользователя

Страница: 21 / 31

40 41
At this point, guide the wheel out of the dropouts. To install the wheel,
assure that the chain is placed on the smaller sprocket, then proceed guid-
ing the wheel back in the dropouts. Assure that the disc brake is inserted
between the pads. Proceed by tighten the washer on both side of the hub
axle, manually at first, then with the 8 mm hexagonal wrench. Conclude, by
removing the lock of the derailleur and bring the chain in tension again.
8.3 REPLACING INNER TUBE.
To replace the inner tube of your NOKO, please follow these instructions
or scan the QR Code to view the video guides.
What do you need? 6 mm hexagonal wrench for the front wheel; 8 mm
hexagonal wrench for the rear wheel; a pair of bike tires levers.
It is a good habit to always carry a basic kit with you, to replace the inner
tube of your NOKO , as needed.
First step, remove the wheel (follow the instructions contained in Paragraph
8.2 ); then, proceed deflating the tire: this way it will be easier to pull the tire
away from the rim. Insert a tires lever under the deflated tire; place pressure
onto the lever and pull the tire away from the rim, clip the lever to a spoke.
Take the second tire lever, and slide the it long the rim of the tire. Manually,
remove the wheel from the rim.
Unscrew the cap and the washer of the valve, remove the inner tube, which
needs to be replaced. Now, you are ready to install the new inner tube.
Start by placing the inner tube in the tire, remove the cap and the washer of
the valve from the spare, to engage the valve stem into the rim. Proceed by
placing the inner tube on the rim, making sure that it doesn’t leave any folds.
After reinstalling the tire (instructions in Paragraph 8.2 ), inflate it, taking
into account the proper pressure values, place the cap on the valve. At this
point you are ready to install the wheel of your NOKO , paying attention to
the previous information.
If your NOKO is equipped with Team 30 wheels (in aluminum),
we advise you to use a 700x35/43c inner tube with a 48 mm
French/Presta valve.
If your NOKO is equipped with Metron 40 wheels (in carbon),
we advise you to use a 700x35/43c inner tube with a 60 mm
French/Presta valve, or alternatively a 700x35/43c inner tube
with a 48 mm French/Presta with an extension for valve.
If the wheel deflates because of puncture on the tire, after re -
moving the inner tube we recommend to look for the object that
caused the puncture. To identify it, turn the tire inside-out, and
carefully run your fingers over the inner surface. Once you found
the object, remove it and check the extent of the damage. If the
damage results in a small hole, you can still use the tire; if the
damage creates a bigger hole, we suggest to replace the tire.
BEFORE EVERY RIDE BEFORE EVERY RIDE