Nokia NPS6113000 - Secure Access System, Руководство по началу работы, Страница: 43 / 48

Configuring Nokia Secure Access System
Nokia Secure Access System Getting Started Guide 43
4.
Enter the base URL.
The base URL specifies the backend Web server (or directory) that corresponds to the Web
resource. The base URL must begin with either http:// or https://. The base URL specifies
where the level of access starts. Include the trailing slash, as the following example shows:
http://www.nokia.com/
5.
Enter the portal link URL.
The portal URL must be more specific than the base URL and provides the exact link that is
displayed when the user clicks the portal link text.
For example:, if the base URL provides access to http://www.nokia.com/, the portal URL
can direct them to http://www.nokia.com/welcome.html/ and display the welcome page.
6.
Specify Citrix Nfuse settings:
a.
If the base URL is for a Citrix Nfuse Classic Web server, check the check box to specify
that the Web resource is a Citrix Web server.
b. Specify the access control settings:
„
Do not perform access control on connections to MetaFrame servers (default).
„
Use the Global Rules to perform access control on connections to MetaFrame servers.
7. Specify the proxy settings.
You can configure Web resources to use:
„
No proxy—the gateway communicates directly with the Web server. No proxy is the
default setting.
„ The default HTTP proxy—you can define the default HTTP or HTTPS proxy settings
from the Resources > Web > Proxies page.
„
A specific HTTP or HTTPS proxy—if you select this option, enter the IP address and
port number of the proxy server.
8.
Check the check box to allow pass-through credentials for this Web Resource.
This means that the user does not have to authenticate a second time to this resource if their
authentication method has pass-through credentials enabled, and this resource uses the same
authentication credentials.