Nokia NPS6113000 - Secure Access System, Руководство по началу работы, Страница: 17 / 48

Installing the Nokia Secure Access Package
Nokia Secure Access System Getting Started Guide 17
Initializing When the Package Is Preinstalled
If the Nokia Secure Access System package is already installed on the appliance, it must be
activated (turned on) and enabled before you sign on to the Nokia Secure Access System
gateway.
See “Activating the Package with Nokia Network Voyager” on page 22.
Installing the Package with Nokia Network Voyager
This section describes how to install the Nokia Secure Access System package by using Nokia
Network Voyager, including what you need to know before you start the installation, using FTP
to transfer the packing and installing and upgrading tasks.
Before you Start
Before you install the package with Nokia Network Voyager, do the following:
„
Disable any other packages, including firewall and VPN packages before you install the
Nokia Secure Access System package.
„ Verify that Nokia IPSO v3.7, v3.7.1, or v3.8 is installed on your appliance.
If your appliance is running an earlier version of Nokia IPSO, you can upgrade to a newer
version by obtaining the Nokia IPSO installation file from
http://support.nokia.com
First, you should check for compatibility between Nokia IPSO and Nokia Secure Access
System versions at
https://support.nokia.com/register/productsSupported.jsp#ems . Then,
you can install this file by using Nokia Network Voyager.
Obtaining the Package
If the Nokia Secure Access System software package is not on your appliance, you can obtain
the package from the Nokia support site at
https://support.nokia.com . After you download the
package, you can transfer the file to the opt/packages directory on the Nokia Secure Access
System gateway.
Transferring the Package with FTP
After you download the nsas_3_0_0_<timestamp>.tgz package file, you can transfer the
package to the appliance by using FTP, then install the package.
To download the package with Nokia Network Voyager
1. Download the nsas_3_0_0_<timestamp>.tgz package file from the Nokia support site at
https://support.nokia.com .
2.
If the workstation on which you stored the package file does not allow FTP access, transfer
the package file to a computer that you can access with FTP.
3. From the Nokia Network Voyager main page, select System Configuration.