Nokia NPS6113000 - Secure Access System, Руководство по началу работы, Страница: 25 / 48

Installing the Nokia Secure Access Package
Nokia Secure Access System Getting Started Guide 25
Installing the Package From the Command-Line Interface
Disable any other packages, including firewall and VPN packages before you install the Nokia
Secure Access System package. This section describes how to install and enable the Nokia
Secure Access System package from the Command-Line Interface (CLI).
You can install the package from the CLI by using the newpkg command. The newpkg
command automatically extracts the package files into the /opt directory and activates the
package. When you enter newpkg, the script guides you through the installation process. You
can also specify command options, which are listed in
Table 3 on page 26.
Note
Installing or upgrading the package by using the Nokia IPSO clish command is not
supported.
To access the CLI
1. Log on to the appliance by using a command-line connection (SSH, console, or Telnet) over
a TCP/IP network.
For example:
telnet 10.5.189.21
2. Sign on by using the username admin, and use the admin password.
To install the package from the CLI
1. From the command line, enter:
newpkg -n/opt/packages/nsas_3_0_0_<timestamp>.tgz
The following options appear:
Load new package from:
1. Install from CD-ROM.
2. Install from anonymous FTP server.
3. Install from FTP server with username and password.
4. Install from local filesystem.
5. Exit new package installation.
2.
Enter
4.
The following response appears:
End of new package installation
cleaning up ..done
„ If the Network Voyager ports listed are different from 80 or 443, the Nokia Secure
Access System package is installed, activated, and enabled. See
“Signing On to the
Gateway as the Administrator” on page 27.
„ If you use the
-
i argument with the newpkg command, you must activate the package.
See “Activating the Package with Nokia Network Voyager” on page 22.