Nokia N800 - Internet Tablet - OS 2007, Руководство по обслуживанию

Страница: 162 / 218

General instructions for WLAN RX troubleshooting
Context
To start RX troubleshooting
Steps
1. Connect the module jig MJ-103 to a computer with a DAU-9S cable or to an FPS-8 flash prommer with an
XCS-4 modular cable and USB cable. Make sure that you have a PKD-1 dongle connected to the computer’s
parallel port.
2. Connect a DC power supply to the module test jig (MJ-103) with an FLC-2 cable.
Note: When repairing or tuning the receiver use external DC supply with at least 3A current
capability. Set the DC supply voltage to 12V and set the jumper connector on test jig to "bypass"
position.
3. Connect an RF cable to the RF connector of the module test jig (MJ-103) and RF signal generator;
4. Set the phone module to test jig and start Phoenix service software.
5. Initialize connection to the phone. (Use FBUS driver when using DAU-9S).
6. To choose a product in Phoenix: From the File menu, choose “Choose Product” and select RX-34 from the
list or from the File menu, choose “Scan Product”.
7. From the toolbar, set operating mode to "Local".
8. From the Testing menu, choose “WLAN RX tests”.
9. In the “WLAN RX tests” window:
• Test mode "Generator mode"
• Channel "7” (2.442 GHz)
• Press "Start" button"
RX-34
RF Troubleshooting
Page 7 –10 COMPANY CONFIDENTIAL Issue 2
Copyright © 2007 Nokia. All rights reserved.