GB 14
Channel Search
From the Channel Search menu the Mediamaster will automati-
cally search for TV and Radio channels digitally transmitted from
the satellite which your dish is aimed at.
The search will be performed in a predetermined way, and all
channels found will be listed in two columns on the screen.
TV channels will be listed in one column, Radio channels in the
other.
Please note, that the search procedure may take a few minutes.
When the search procedure is finished the indication
“Ready. To watch TV press OK” will appear in the bottom part
of the menu.
When you press
OK
a new menu superimposed upon the TV pic-
ture appears, where you have the opportunity to adjust the clock.
This is done with the
UP/DOWN
buttons,
±
1/2 an hour at the
time. After that, the Mediamaster will automatically keep the right
time.
Now you are ready to watch TV. Please proceed to “Viewing TV”
in this Manual.
Antenna Configuration Set-Up
The following description is an “Advanced procedure” and
is only necessary if you have special equipment connected.
If you have another antenna combination you can configure it
from this menu, which appears when you make a selection from
the “Antenna Configuration” menu, line “One antenna, LNB for
any other satellite” or line “Multiantenna/LNB for multiple satel-
lite positions”.
Antenna alternative
: Select an Antenna alternative from
1 to 8. Please note, that the parameters in the menu are prepro-
grammed, but you can change any of them to suit your combi-
nation.
Name for this satellite
: From here you can select a name for the
configuration.
LNB Frequency
: Selection is possible for different kinds of LNBs.
Select the frequency for the LNB that is valid for your combina-
tion. You may also enter a value with the number buttons on the
remote control.
0/12 Volt antenna switch
: Control of an external LNB switch,
i. e. switching between two different satellite dishes.
