Nokia IP40 - Satellite Unlimited - Security Appliance, Руководство пользователя

Страница: 83 / 244

Nokia IP40 Security Platform User’s Guide v1.1 83
6
Managing Your Local Area Network
This chapter explains the step-by-step information required to manage your local area network
by using the Nokia IP40 security platform.
You can manage and configure your network connection and settings, and view the connections
information on the connection in terms of status, connection duration, and activity.
This chapter includes the following topics:
„
Configuring Network Settings
„
Enabling and Disabling the DHCP Server
„
Changing IP Addresses
„
Enabling or Disabling Hide NAT
„
Configuring a DMZ Network
„
Using Static NAT
„
Using Static Routes
Configuring Network Settings
Caution
Network settings are advanced settings. Nokia recommends that these settings not be
changed unless it is necessary and you are qualified to do so. Changing network
settings might result in losing the connection to the device.
If you change the network settings to incorrect values, and you are unable to correct the error,
reset the IP40 to its factory settings.
To reset the Nokia IP40 Security Platform to its factory default settings, choose Setup >
Firmware > Tools > Factory Settings. You can also press the
Reset button at the rear panel of the
device.
Note
To set the device to factory defaults by using the Reset button, press the Reset button for a
minimum of seven seconds.