manualshive.com logo in svg

Nokia IP40 - Satellite Unlimited - Security Appliance, Руководство пользователя

Поделиться
Скачать
Nokia IP40 - Satellite Unlimited - Security Appliance Скачать руководство пользователя страница 209

Automatic and Manual Updates

Nokia IP40 Security Platform User’s Guide v1.1

209

3.

To re-enable the service, click Resume, either in the popup window, or on the Email 
Antivirus page.

„

The service is re-enabled for all internal network computers.

„

If you clicked Resume in the Email Antivirus page, the button changes to Snooze.

„

If you clicked Resume in the Email Antivirus Off popup window, the popup window 
closes.

Automatic and Manual Updates

If you are subscribed to Software Updates, you can check for new security and software updates.

Checking for Software Updates when Locally Managed

If your Nokia IP40 security platform is locally managed, you can set it to automatically check 
for software updates, or you can set it so that software updates can be checked manually.

To configure software updates when locally managed
1.

Click Services in the main menu, and click the Software Updates tab.
The Software Updates page appears.

Содержание IP40 - Satellite Unlimited - Security Appliance





















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды