manualshive.com logo in svg

Nokia IP40 - Satellite Unlimited - Security Appliance, Руководство пользователя

Поделиться
Скачать
Nokia IP40 - Satellite Unlimited - Security Appliance Скачать руководство пользователя страница 190

14

 Working with VPNs

190

Nokia IP40 Security Platform User’s Guide v1.1

network. The IP40 Satellite X is configured through the IP40 GUI Security page to port forward 
the inbound traffic to the defined host.

Defining a Backup VPN Gateway

You can define backup VPN gateway to support the main or primary VPN gateway. If the 
primary VPN gateway fails, the back up gateway takes over.

To define a backup VPN Gateway
1.

Click VPN from the main menu, and select the VPN Sites tab.

2.

Click the New Site at the bottom of the page.
The VPN Site Wizard page appears.

3.

Select Site-to-Site VPN, and click Next.
The VPN Gateway address page appears.

4.

Enter the IP address of the primary Check Point management station with enforcement 
module, and click Next.
The VPN Network Configuration page appears.

5.

In the Destination Network text box 1, enter the network address behind the primary Check 
Point management station with enforcement module.
Enter 255.255.255.0 as the subnet mask.

6.

In the Destination Network text box 2, enter the network address behind the secondary 
Check Point management station with enforcement module.
Enter 255.255.255.0 as the subnet mask.

7.

Enter the IP address of the secondary Check Point management station in the Backup 
Gateway field.

For information about how to configure the primary and secondary Check Point management 
stations, see the 

Check Point Multiple Entry Point

 document.

Nokia IP40 Satellite X to VPN-1 (Site-to-Site VPN)

Nokia IP40 Satellite X to VPN-1 or Check Point v4.1, FP1, FP2, FP3, NG, or NG AI 
configuration enables you to establish site-to-site VPN connections between an IP40 Satellite X 
site-to-site VPN gateway and a VPN-1 site-to-site VPN gateway.

Note

In this solution model, both the VPN-1 and IP40 Satellite X site-to-site VPN gateways must 
have a static IP address.

Figure 11 

on page 191 shows an implementation of the IP40 Satellite X to Check Point VPN-1 

solution, in which two IP40 Satellite X devices are connected to a VPN-1 site-to-site VPN 
gateway.

Содержание IP40 - Satellite Unlimited - Security Appliance





















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды