Nokia IP2255 - Security Appliance, Руководство по установке

Страница: 83 / 124

Removing, Installing, and Replacing NICs
Nokia IP2255 Security Platform Installation Guide 83
6.
Gently pull the NIC out from the slot and place it on a suitable, grounded
work surface.
7. Insert the new or replacement NIC into the empty slot on the front of the
appliance until it clicks into place.
Note
If you remove a NIC and do not install a new one, you must install a
cover plate onto the front of the empty slot formerly occupied by the
NIC you removed. The cover plate is required for the Nokia IP2255
appliances to meet emissions requirements during operation.
8. Press the lever to make sure that the NIC is locked into place.
9. Tighten the two retaining screws on the front plate of the NIC.
If you cannot tighten the retaining screws, the NIC is not installed
properly. Remove the NIC and reinstall it. The front plate of the NIC must
be flush with the chassis. The link light might illuminate even if the NIC
is not fully installed, but the NIC will not function properly.
00305
1
2
3
4
10/100/1000Base
T
10/100BaseT
10/100BaseT
10Base-SR X2
A
L
A
L
IP2255
1
3
5
7
2
4
6
8
1
3
5
7
2
4
6
8
1
3
5
7
5
7
L
A
L
A
L
A
L
A
SLOT 1
SLOT 2
SLOT 4
SLOT 5
SLOT 3
CONSOLE
PCMCIA
1
2
RESET
10Base-SR X2
A
L
10Base-SR X2
A
L