Nokia IP200 Series Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 100

background image

2

Nokia IP200 Series Security Platform Installation Guide

COPYRIGHT

©2006 Nokia. All rights reserved.
Rights reserved under the copyright laws of the United States.

RESTRICTED RIGHTS LEGEND

Use, duplication, or disclosure by the United States Government is subject to restrictions as set
forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at
DFARS 252.227-7013.

Notwithstanding any other license agreement that may pertain to, or accompany the delivery of,
this computer software, the rights of the United States Government regarding its use,
reproduction, and disclosure are as set forth in the Commercial Computer Software-Restricted
Rights clause at FAR 52.227-19.

IMPORTANT NOTE TO USERS

This software and hardware is provided by Nokia Inc. as is and any express or implied
warranties, including, but not limited to, implied warranties of merchantability and fitness for a
particular purpose are disclaimed. In no event shall Nokia, or its affiliates, subsidiaries or
suppliers be liable for any direct, indirect, incidental, special, exemplary, or consequential
damages (including, but not limited to, procurement of substitute goods or services; loss of use,
data, or profits; or business interruption) however caused and on any theory of liability, whether in
contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use
of this software, even if advised of the possibility of such damage.

Nokia reserves the right to make changes without further notice to any products herein.

TRADEMARKS

Nokia is a registered trademark of Nokia Corporation. Other products mentioned in this document
are trademarks or registered trademarks of their respective holders.

060101

«
1
2
3
4
...
»

Содержание IP200 Series





































































































Отзывы:

Нет отзывов

Похожие инструкции для IP200 Series

Бренд: ABB Страницы: 20

Бренд: Samsung Страницы: 36

Бренд: Varian Страницы: 176

Бренд: R.V.R. Elettronica Страницы: 38

PlayWorks PS2000 Digital

Бренд: Cambridge SoundWorks Страницы: 22

MegaWorks THX 2.1 250D

Бренд: Cambridge SoundWorks Страницы: 13

Бренд: Cambridge SoundWorks Страницы: 14

Бренд: Gas Clip Technologies Страницы: 16

Бренд: Magnavox Страницы: 24

Бренд: Magnavox Страницы: 22

Бренд: Magnavox Страницы: 21

Magnavox FW 750C

Бренд: Magnavox Страницы: 28

Magnavox FW 2012

Бренд: Magnavox Страницы: 16

Бренд: QBTech Страницы: 13

Бренд: Electro-Voice Страницы: 2

Бренд: System Q Страницы: 52

Бренд: Cyrus Страницы: 6

Бренд: ACTi Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды