27
•
Auto Power On Time
: Available if the Power On Time Type is enabled. Set the desired time for your TV to
come on from standby using the directional buttons and press OK to save the new set time.
•
Power Off Time Type
: Set your TV to turn off by itself. Set this option as On or Once to enable a power off
timer to be set, set as Off to disable. If set as Once the TV will turn off only once at the defined time in Auto
Power Off Time option below.
•
Auto Power Off Time
: Available if the Power Off Time Type is enabled. Set the desired time for your TV to go
to standby using the directional buttons and press OK to save the new set time.
10.5.4. Language
Set your language preference.
10.5.5. Keyboard
Select your keyboard type and manage keyboard settings.
10.5.6. Inputs
Show or hide an input terminal, change the label for an input terminal, and configure the options for HDMI
CEC(Consumer Electronic Control) function and display the CEC device list.
10.5.7. Power
•
Sleep Timer
: Define an idle time after which you want your TV to enter sleep mode automatically.
•
Picture off
: Select this option and press OK to turn the screen off. Press a button on the remote or on the
TV to turn the screen on again. Note that you cannot turn the screen on via the /-, Mute and Standby
buttons. These buttons will function normally.
•
Switch off Timer
: Define a time after which you want your TV to switch off automatically. Set as Off to disable.
•
No Signal Auto Power Off
: Set the behaviour of the TV, when no signal is detected from the currently set
input source. Define a time after which you want your TV to turn itself off or set as Off to disable.
10.5.8. Picture
•
Picture Mode
: Set the picture mode to suit your preference or requirements. Picture mode can be set
to one of these options: User, Standard, Vivid, Sport, Movie and Game. You can use User mode to create
customised settings.
• Backlight, Brightness, Contrast, Colour, Hue, Sharpness settings will be adjusted according to the selected
picture mode. If one of these settings is changed manually, Picture Mode option will be changed to User, if
not already set as User.
•
Auto Backlight
: Set your auto backlight preference. Off, Low, Middle and Eco options will be available. Set as
Off to disable.
•
Backlight
: Adjust the backlight level of the screen manually. This item will not be available if the Auto
Backlight is not set as Off.
•
Brightness
: Adjust the brightness value of the screen.
•
Contrast
: Adjust the contrast value of the screen.
•
Colour
: Adjust the colour saturation value of the screen.
•
Hue
: Adjust the hue value of the screen.
•
Sharpness
: Adjust the sharpness value for the objects displayed on the screen.
•
Gamma
: Set your gamma preference. Dark, Middle and Bright options will be available.
•
Colour Temperature
: Set your colour temperature preference. User, Cool, Standard and Warm options
will be available. You can adjust red, green and blue gain values manually. If one of these values is changed
manually, Colour Temperature option will be changed to User, if not already set as User.
•
Display Mode
: Set the aspect ratio of the screen. Select one of the predefined options according to your
preference.
•
HDR
: Turn the HDR function on or off. This item will be available if HDR content is detected.
10.5.9. Advanced video
•
DNR
: Dynamic Noise Reduction (DNR) is the process of removing noise from digital or analogue signal. Set
your DNR preference as Low, Medi- um, Strong, Auto or turn it off by setting as Off.
•
MPEG NR
: MPEG Noise Reduction cleans up block noise around outlines and noise on the back- ground. Set
