14
5.1. Magic button (Nokia Smart TV 75”)
Connect power
Important:
The TV set is designed to operate on 220-240V AC, 50 Hz socket.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains. Plug the power cable to the mains socket outlet. The TV will switch on automatically.
To switch on the TV from standby
If the TV is in standby mode the standby LED lights up. To switch on the TV from standby mode either:
• Press the Standby button on the remote control.
• To turn on the TV set, press the control switch in the center of the TV set.
To switch the TV into standby
The TV cannot be switched into standby mode via control switch. Press and hold the Standby button on the
remote control. Power off dialogue will appear on the screen. Highlight OK and press the OK button. The TV
will switch into standby mode.
To switch off the TV
To power down the TV completely, unplug the power cord from the mains socket.
Quick standby mode
In order to switch the TV into quick standby mode either;
• Press the Standby button on the remote. Press again to go back to operating mode.
• Press the centre of the control switch on the TV in and hold it down for a few seconds. Press again to go back
to operating mode.
5.2. On-Off button
Connect power
Important:
The TV set is designed to operate on 220-240V AC, 50 Hz socket.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains. Plug the power cable to the mains socket outlet. The TV will switch on automatically.
To switch on the TV from standby
If the TV is in standby mode the standby LED lights up. To switch on the TV from standby mode either:
• Press the Standby button on the remote control.
• Press the control button on the TV. The TV will then switch on.
To switch the TV into standby
The TV cannot be switched into standby mode via control button. Press and hold the Standby button on the
remote control. Power off dialogue will appear on the screen. Highlight OK and press the OK button. The TV
will switch into standby mode.
To switch off the TV
To power down the TV completely, unplug the power cord from the mains socket.
Quick standby mode
In order to switch the TV into quick standby mode either;
• Press the Standby button on the remote. Press again to go back to operating mode.
• Press the control button on the TV. Press the control button again to go back to operating mode.
5.3. Turning on/off the Nokia Smart TV 24”
5.3.1. Connected with power adapter
Connect power
Important:
The TV set is designed to operate on a 12 V DC supply. For this, an adaptor is used which gives 12 V voltage.
