Nokia Check Point IP2450, Руководство по установке

Страница: 82 / 136

6
About IP2450 Appliance ADP Services Modules
82 Check Point IP2450 Security Platform Installation Guide
3. Delete the interface names and configuration information for each interface you removed by
following the remaining steps in this procedure.
Note
To delete an interface used by VRRP or IP clustering, you must first disable the feature
that uses the interface. This is why you deleted the VRRP configuration before you
installed the ADP module.
4. Click a physical interface name.
Check Point Network Voyager displays the Physical Configuration page for that interface.
5. In the Physical Status area, click the Delete check box.
6. Click Apply.
7. Delete the configuration information for the rest of interfaces that you removed by restarting
this procedure at
step 2 .
8. When you have deleted the configuration information for all the interfaces that you
removed, click Save.