manualshive.com logo in svg

Nokia 9000i, Руководство по обслуживанию

Поделиться
Скачать
Nokia 9000i Скачать руководство пользователя страница 172

After Sales

Technical Documentation

RAE/RAK–1N

Service Software

Page 7– 14

Amendment 1 04/97

•

 When the insert mode is activated the <Back space> key 

moves the cursor back and deletes the character under the 
cursor so that all characters after the deleted character are 
moved one position back. If the cursor is at the first position of 
the first line nothing happens.

<Del>

Has also two different meanings depending on the editing 
mode;

•

 When the overstrike mode is activated the <Del> key changes 

the character under the cursor into a space and moves the 
cursor forward. If the cursor is at the last editing position of the 
last line nothing happens.

•

 When the insert mode is activated the <Del> key removes the

   character under the cursor so that all characters after the
  removedcharacter are moved one position back. If the cursor 
is at the last editing position of the last line nothing happens.

<F1>

Function key number 1 activates the help window.

<F4>

Clears text in the editing window.

Содержание 9000i



















































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды