You can further automate the transmission by including cer-
tain special characters in a stored digit sequence:
the“+”- character links two memory locations together:
➊
Key in or recall from the memory the phone number you
want to dial.
➋
Press
✳ ✳
quickly to add a linking character to the end
of the phone number.
➌
Key in the number of the second memory location which
contains DTMF digits.
➍
Store this phone number in a memory location.
the p-character:
This character may be used to separate parts of a long
number sequence; it generates an automatic 2.5 second
pause. All the digits following the pause will be sent as DTMF
tones.
To obtain “p”, press
✳ ✳ ✳
.
the w-character:
If you want to dial a phone number and then send DTMF
tones in one sequence, you can place a w-character (“wait”)
between the phone number and the DTMF digits. Press
to send the rest of the string. To obtain “w”, press
✳ ✳ ✳ ✳
.
Please note that it is possible to store numbers with +, p-
and w-characters only in memory B (the phone’s memory).
NME-2 and NME-2A/HSE-6XA
(GSM Mobile) Nokia 6081
9351299 / 9351327 en, issue 1
13.12.1996
26
