●
DNS address
— Enter the IP addresses of the primary and secondary DNS servers,
if required by your service provider. To obtain these addresses, contact your
internet service provider.
●
Proxy server address
— Enter the address of the proxy server.
●
Proxy port number
— Enter the port number of the proxy server.
WLAN internet access points
Select
Menu
>
Settings
and
Connectivity
>
Destinations
>
Access point
, and
follow the instructions on the screen.
To edit a wireless LAN (WLAN) access point, open one of the access point groups and
select an access point marked with .
Follow the instructions from your WLAN service provider.
●
WLAN network name
— Select
Enter manually
or
Search for networks
. If
you select an existing network, WLAN network mode and WLAN security mode
are determined by the settings of its access point device.
●
Network status
— Define whether the network name is displayed.
●
WLAN network mode
— Select
Ad-hoc
to create an ad hoc network and to
allow devices to send and receive data directly; a WLAN access point device is
not needed. In an ad hoc network, all devices must use the same WLAN network
name.
●
WLAN security mode
— Select the encryption used:
WEP
,
802.1x
(not for ad
hoc networks), or
WPA/WPA2
. If you select
Open network
, no encryption is
used. The WEP, 802.1x, and WPA functions can be used only if the network
supports them.
●
Homepage
— Enter the web address of the starting page.
●
Use access point
— Select
After confirmation
if you want the device to ask for
confirmation before the connection using this access point is created or
Automatically
if you want the device to connect to the destination using this
access point automatically.
To enter the settings for the selected security mode, select
WLAN security
settings
.
Security settings for WEP
© 2009 Nokia. All rights reserved.
98
