Nokia 5500 Sport, Руководство пользователя

Страница: 178 / 232

T o o l s
58
Select Options > Advanced settings
to change the following options:
Network type (for packet data only)
— the Internet protocol (IP) version
of the network:
IPv4 or IPv6 . The
other settings depend on the
selected network type.
IPv4 settings and IPv6 settings (for
data call only) — the Internet
protocol settings. The settings
depend on the network type.
Phone IP address (for IPv4) — to
enter the IP address of your phone
DNS address — to enter the IP
address of the primary and
secondary DNS servers
Proxy serv. address — to enter the IP
address of the proxy server
Proxy port number — to enter the
port number of the proxy server
The following settings are shown if
you have selected data call as the
connection type:
Use callback > Yes — to allow a
server to call you back once you have
made the initial call. Contact your
service provider to subscribe to this
service.
The phone expects the callback call
to use the same data call settings
that were used in the callback-
requesting call. The network must
support that type of call in both
directions, to and from the phone.
Callback type — The options are Use
server no. and Use other no. .
Callback number — to enter your
phone number which the dial-back
server uses.
Use PPP compress. — To speed up
data transfer, select Yes if supported
by the remote PPP server.
Use login script > Yes — to use a
login script when establishing the
connection
Login script —to insert the login
script
Modem initialisation (modem
initialization string) — to control
your phone using modem AT
commands. If required, enter
commands specified by your service
provider or Internet service provider.
Packet data
The packet data settings affect all
access points using a packet data
connection.
9249411_5500 Sport_2_en_zh.fm Page 58 Friday, June 30, 2006 4:13 PM