[ 89 ]
Advanced features
End the active call
To end the active call, simply allow the other party to hang up; the call on
hold then becomes the active call. OR:
1
Press
to terminate the active call.
2
The network redials your phone with the call on hold. Answer this as
you would any normal incoming call.
• MAKE A CONFERENCE CALL
This feature allows you to talk to two people at the same time. Conference
calling is a network-dependent feature.
Note:
Check with your service provider to make sure this service
is available in your network.
1
Make a call to the first participant as usual. When you’re ready to
place a call to the next party,
2
Press Options, then press New call.
3
Enter the number and press
(or press
Search
to recall the
number from the phone book).
4
Press
again to connect both parties.
5
To end the call, press
. This action disconnects both parties.
End calls
To end a conference call (disconnect with all callers), press
. Or you
can also press
Options
, then select
End all calls
.
Disconnect second party
While all three parties are connected, pressing the
key disconnects
the second caller, keeping the first party’s call active.
En3570.book Page 89 Wednesday, September 11, 2002 3:08 PM