27
Worn counter-blades make the cutting of forage more difficult and exert more strain on the motor.
Whenever, you notice they are worn out, replace the counter-blade.
REPLACING THE COUNTER-BLADE
After the ensiling machine is turned off:
1- Remove springs
C
and
D
.
2- Hold strap
E
and lift the cover, bring the toothed roller towards the front, as shown in figure 54.
3- Remove the 2 fastening screws from the counter-blade.
4- Replace the counter-blade.
5- Put the toothed roller back to the operating position. Remember to connect the driveshaft again
which actuates the roller.
6- Replace springs
C
and
D
.
Replacing counter-blades
Important!
When connecting the driveshaft, make sure the forks are aligned
(fig.55).
fig.53
fig.54
fig.55
fig.56
COUNTER-BLADE
CORRECT
WRONG
SILAGE CHOPPERS
E
n
g
li
s
h
