Smart Gas Detector / G-Tag ***
28
E. Self-Diagnosis Error Code
G-Tag performs self-diagnosis and automatic calibration after entering the detection
mode, and transmits the error code to the surrounding area if any problem occurs
during self-diagnosis. When the dedicated app receives self-diagnosis error code, the
error code received will be displayed on the app screen as shown in the following
figure. Possible error codes and causes are as shown in the following table.
Error
Code
Possible Error and Causes
E0
Sensor
damage
or
error
of
electromagnetic interference
E4
Oxygen(O
2
) sensor related errors
E5
Carbon monoxide(CO) sensor related
errors
E6
Hydrogen sulfide(H
2
S) sensor related
errors
- If self-diagnosis error occurs, turn off the device and turn int on again.
- If the problem persists, contact NodeTalks Corp.
E-mail:
Website:
www.nodetalks.co.kr
