Shaft lock doesn’t lock
Try solution 1:
When fitting and fastening an accessory to the rotating end of the
tool, keep the shaft lock button held down until you feel it lock. The tip should no
longer be able to turn.
If it continues to turn, the rotating mechanism is faulty and
will need to be repaired. Contacts us at
to have your tool
repaired or replaced by us.
Try solution 2:
Remove any dirt built up in or around the shaft lock button using a
small brush (an old toothbrush works great) and try to attach your accessory.
Flexible driver’s inner shaft comes loose
Follow the step by step guide back on pages 32-33. If you’re still having
difficulties, see below for a recap…
1
2
3
4
Thread the hex cap nut over the inner metal shaft. The threadable part of the
cap nut should face away from you. Hold in one hand.
In the other hand, take the tool and hold down the shaft lock button. Mount
the thredable end of the hex cap nut with the inner shaft inserted, onto the
rotating tip of the tool. Begin to tighten the hex nut cap.
Continue tightening the thread until you feel the lock button click. The
rotating tip lock is now locked. Let go of the lock button.
The cap nut can now be fully tightened. Place the hood over the hex cap nut
and you’re done. Contact us at [email protected] if you’re still having
problems.
40
