4
5
Screw the cutting guide onto the rotary tool where the housing cap would
normally be.
To use the cutting guide, adjust the height/depth by turning the screw on the
side of the cutting guide, and move the
rotary tool around with the cutting
guide flat on the surface you're cutting.
How to attach and use the sanding/grinding guide
1
2
3
4
5
Remove the housing cap from your rotary tool.
You can see a picture of the
housing cap & its location on page 9.
Attach your chosen sanding/grinding accessory to the rotary tool using the
collet nut kit - follow the how-to on page 25.
Screw the sanding/grinding guide onto the rotary tool where the housing cap
would normally be.
If you're having trouble recognizing the sanding/grinding
guide in your rotary tool kit, flip back to page 13.
To change the depth of the guide, rotate the screw on the side of the
sanding/grinding guide and move the guide up or down, depending on what's
the depth you're aiming for.
Use one of the flat surfaces of the grinding guide to control the movement of
your application.
36
