CLEANING AND MAINTENANCE
Cleaning
Before starting to clean your precious rotary tool, always disconnect it from the
mains power plug first. The cleaning itself is a pretty simple affair - wipe the
equipment with a clean cloth or blow it with compressed air at low pressure. For
more stubborn stains, use a lightly damp cloth with some soft soap, but make sure
that no water can seep inside your rotary tool (that includes not using wet
attachments & accessories).
NB!
Do not use cleaning agents or solvents, as they may damage the plastic parts.
In between cleanings, try to keep all safety devices, air vents and the motor
housing as far away from dirt and dust as possible.
Maintenance
Good news - there are no parts inside your rotary tool that require professional
maintenance.
Responsible ways of disposal
This product has been marked with a symbol relating to removing electric and
electronic waste.
The Waste Electrical & Electronic Equipment Regulations (WEEE) requires that any
product showing this marking must not be disposed of with other household or
commercial waste. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, please separate any such products from other
waste types and recycle it responsibly at your local recycling facility. Check with
your local authority, recycling centre or retailer for recycling advice. Don’t just
chuck it in the trash or leave out on the street.
38
