NB!
There are directional arrows either side of the rotational direction switch to
indicate forward/reverse.
How to adjust the speed
Using your finger, apply light pressure on the variable speed trigger switch to turn
the chuck in the selected direction. Further increase finger pressure on the trigger
to increase speed. Hold the trigger down fully for maximum speed. Feel the power.
How to insert or change a tool bit
Your impact driver has a built-in 1/4 inch hex chuck. The chuck has been designed
to accept 1/4 inch (6.35mm) hex bits.
Before changing the drill bit, be sure to hold the driver securely in one hand, and
ensure that the trigger switch is in the center ‘off’ position, or remove the battery
(refer to the image on page 18 for how to do this). To insert or remove a bit…
1.
Slide the sleeve forwards and hold
2.
Insert/remove your screw bit into
the chuck and release the sleeve.
Done.
16
