2009
NOCROTEC – Nixie Clock – V600
NOCROTEC
7
12. Factory Presets
Main menu 2:
00:00:00 (Alarm time)
02:00:05 (display mode of time: 5 seconds)
03:00:00 (display mode of date: 0 seconds)
04:03:xx (Cross fade setting: 3)
05:00:00 (time display in 24h mode and date display
in DD.MM.YY arrangement)
00:00:00 (switch off time for night power-down mode)
00:00:00 (switch on time for night power-down mode)
08:00:00 (Leading zero suppression not active)
Alarm clock function is switched off.
13. Memory
All settings (including time and date) are stored
internally while no power line is available.
14. Life Expectancy of the Battery
The life expectancy of the internal battery is more than
10 years.
15. Replacing the Internal Battery
If the clock does not store time while no power is
available the internal battery is probably weak.
Replacement lithium button cells of the type CR2032
can be purchased at your local battery dealer. Observe
the safety instructions of the battery manufacturer.
To replace battery pull the power plug out of the clock.
Put the clock on a smooth surface to protect tubes
from damage. Put the clock on the front in order to
reach the screws on the bottom of the clock. Remove
the 6 screws on the bottom of the clock. Remove the
bottom plate. Remove the weak lithium battery out of
its holder and replace it with the new one. Note that the
plus pole of the battery must point to the bottom of the
clock.
Make sure you do not forget any tools inside the clock.
Mount the bottom plate with the 6 screws.
Check all functions of the clock and then check if the
clock stores the time by pulling the power plug out of
the connector.
If you have problems with this process contact
customer support.
16. Battery Disposal
Do not dispose batteries to the household waste.
Only dispose your old batteries to appropriate points of
acceptance.
Ask your battery dealer for a professional battery
disposal.
17. Cleaning Clock and Tubes
For safety reasons unplug the clock before cleaning.
Clean the clock by gently wiping with a clean, dry cloth.
Never use harsh or abrasive cleaners or organic
solvents or any liquids on the clock or any of its parts.
18. Malfunction and Troubleshooting
Problem:
No display
Reasons and Solution:
a) No line power: Check the outlet for correct
voltage. Check if the power cord is connected
correctly to the power supply and if the power
plug is connected to the clock.
b) The clock is in night power-down mode. Read
the corresponding submenus 2.6 and 2.7.
Problem:
The clock doesn’t store time and date while no
power line is available.
Reason and solution:
Probably, the internal battery is weak.
See ‘15. Replacing the Internal Battery’ on how to
replace the internal battery.
Other problems:
Please contact the customer support.
19. Customer Support
Nocrotec
Burgstr. 5
D-95707 Thiersheim
Germany
Email: [email protected]
Internet: www.nocrotec.com
Содержание Nixie Clock V600
Страница 8: ...NOCROTEC Nixie Clock V600 2009 NOCROTEC 8...
