2009
NOCROTEC – Nixie Clock – V600
NOCROTEC
5
•
Press button 1 long time (1 second) to leave
submenu 2.3.
•
Press button 1 long time (1 second) to leave main
menu 2.
•
Clock starts running in display mode.
Submenu 2.4: Setting Cross Fade
If this submenu is entered display shows 04:xx:yy.
‘xx’ indicates the cross fade value.
Digits ‘yy’ show the crossfading as example. You can
watch the different settings at ‘yy’ and chose your
preferred cross fading at ‘xx’.
The cross fade settings at position ‘xx’ mean the
following:
00: no crossfading, the digits jump from one to the
next.
01: very fast crossfading from digit to digit
02: fast crossfading from digit to digit
03: middle fast crossfading from digit to digit
(standard value)
04: slow crossfading from digit to digit
05: very slow crossfading from digit to digit
Setup Example:
•
The value in this menu shall be set to 04.
•
Clock is in display mode.
•
Press button 1 (short) to enter the main menu 2.
•
Clock stops and displays the current set alarm time.
•
Press button 2 three times to reach submenu 2.4
•
Press button 1 (short) to enter the submenu 2.4.
•
Press button 2 (to count up) and button 3 (to count
down) to set the value to '04')
•
Press button 1 long time (1 second) to leave the
submenu 2.4.
•
Press button 1 long time (1 second) to leave the
main menu 2.
•
Clock starts running in display mode.
Submenu 2.5: Setting Different Display
Variants (time 12/24h and date DD.MM.YY/
MM.DD.YY)
If this submenu is entered, the display shows 05:00:xx
whereas ‘xx’ indicates the following:
00: Display mode shows time in 24h mode and date
in arrangement: DD.MM.YY
01: Display mode shows time in AM/PM (12h) mode
and date in arrangement: DD.MM.YY
02: Display mode shows time in 24h mode and the
date in arrangement: MM.DD.YY
03: Display mode shows time in AM/PM (12h) mode
and date in arrangement: MM.DD.YY
Setup Example:
•
The value in this menu shall be set to 03.
•
Clock is in display mode.
•
Press button 1 (short) to enter the main menu 2.
•
Clock stops and displays the current set alarm time.
•
Press button 2 four times to reach submenu 2.5
•
Press button 1 (short) to enter the submenu 2.5.
•
Press button 2 (to count up) and button 3 (to
count down) to set the value to '03')
•
Press button 1 long time (1 second) to leave the
submenu 2.5.
•
Press button 1 long time (1 second) to leave the
main menu 2.
•
Clock starts running in display mode.
Submenu 2.6: Setting Switch off Time
for Night Power-Down Mode
The display (internal power supply) can be
automatically switched off for a user defined time.
In this menu the display shows the entered time the
display shall switch off. If the clock is set up to
AM/PM mode, nevertheless the display shall show
the time in 24h mode.
Using button 2 and 3 the chosen digit can be set.
To switch to the next position, button 1 must be
pressed. To confirm this step shifting from digit to
digit, the following digit flashes. After the last digit,
the first digit shall be enabled again.
The alarm function shall work even if the clock is in
night power-down mode as the alarm function
activates the clock for 30 minutes.
Use the night power-down mode in order to save
energy and increase the live expectancy of the
tubes.
Setup Example:
•
The clock shall automatically switch off at
11:45:00 PM = 23:45:00 o'clock
•
Clock is in display mode.
•
Press button 1 (short) to enter the main menu 2.
•
Clock stops and displays the current set alarm
time.
•
Press button 2 five times to reach submenu 2.6
•
Press button 1 (short) to enter the submenu 2.6.
•
Press button 2 (to count up) and button 3 (to
count down) to set the first digit (to '2')
•
Press button 1 (short) to jump to the second digit
•
Press button 2 and button 3 to set the second
digit (to '3')
•
Press button 1 (short) to jump to the third digit
•
Press button 2 and button 3 to set the third digit
(to '4')
•
Press button 1 (short) to jump to the fourth digit
•
Press button 2 and button 3 to set the fourth digit
(to '5')
•
Press button 1 (short) to jump to the fifth digit
•
Press button 2 and button 3 to set the fifth digit
(to '0')
•
Press button 1 (short) to jump to the sixth digit
•
Press button 2 and button 3 to set the sixth digit
(to '0')
•
Press button 1 long time (1 second) to leave the
submenu 2.6.
•
Press button 1 long time (1 second) to leave the
main menu 2.
•
Clock starts running in display mode.
Содержание Nixie Clock V600
Страница 8: ...NOCROTEC Nixie Clock V600 2009 NOCROTEC 8...
