EN
them.To ensure maximum battery life, avoid charging your product for more than a week at a time, as overcharging may shorten battery life. Over time, an unused product will
discharge and must be recharged before use. Disconnect the product from power sources when not in use. Use the product only for their intended purposes.
Medical Devices.
Product may emit electromagnetic fields. Product contains magnetic components which may interfere with pacemakers, defibrilators, or other medical devises. These
electromagnetic fields may interfere with pacemakers or other medical devices. Consult with your physician prior to use if you have any medical device including pacemakers. If
you suspect the product is interfering with a medical device, stop using the product immediately and consult your physician.
Medical Conditions.
If you have any medical
condition that you believe could be affected by product, including but not limited to; seizures, blackouts, eyestrain or headaches, consult your physician prior to use of product. The
use of a integrated high-powered flashlight contains a light sensitivity hazard. Use of the light in Strobe Mode may cause seizures in persons with photosensitive epilepsy, which
may result in serious injury or death.
Light.
Staring directly into the light beam or shine of the flashlight may result in permanent eye injury. The product is equipped with a high
output LED pre-focused lamp that emits a powerful beam at the highest setting.
Cleaning.
Power off the product before attempting any maintenance or cleaning. Clean and dry
product immediately if it comes in contact with liquid or any type of contaminant. Use a soft, lint-free (microfiber) cloth. Avoid getting moisture in openings.
Explosive
Atmospheres.
Obey all signs and instructions. Do not operate product in any area with a potentially explosive atmosphere, including fueling areas or areas which contain chemicals
or particles such as grain, dust or metal powders.
High-Consequence Activities.
This product is not intended for use where the failure of the product could lead to injury, death
or severe environmental damage.
Radio Frequency Interference.
Product is designed, tested, and manufactured to comply with regulations governing radio frequency
emissions. Such emissions from the product can negatively affect the operation of other electronic equipment, causing them to malfunction.
Model Number: GB20
This device
complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
