NOBOCOOL Orion 700, Руководство пользователя

Страница: 17 / 31

17
R
e
-p
ro
g
ra
m
m
in
g
y
o
u
r
O
rio
n
7
0
0
3 Re-programming your Orion 700
What happens if your Orion 700 has already been
programmed?
It is quite likely that your Orion 700 has already been programmed and
you wish to change the settings. This is likely if you have moved into
your home and the previous owner has already programmed the unit
or alternatively if you have moved into your new home and the
contractor or electrician has programmed the unit.
In these circumstances it is recommended that you read chapter 2
entitled ‘Programming your Orion 700’ in order to familiarise yourself
with the functionality of the unit.
Zones and Receivers
Each appliance or device you wish to control with the Orion 700 must
have a receiver attached to it. Each receiver will have its own unique 12
digit code that ensures the Orion 700 can identify and control each
appliance on an individual basis.
Panel heaters come supplied with an RDC 700 electronic Thermostat
which contains the controls to set temperature levels as well as its own
inbuilt wireless Receiver. (Further information on Thermostat Control is
found on pages 20).
All NOBO panel heaters have a unique 12 digit code. A copy of that
code should also be found in the back pages of this manual identified
to each zone. If however this code and corresponding zone information
is missing it will be necessary for you to locate and identify the receiver
codes yourself, this can be done as follows: