Noblift LPT22, Руководство по техническому обслуживанию

Страница: 50 / 65

49
4.5 CLEANING OIL TANK AND FILTER
Collapse the forks to the loweredd position. Then drain the hydraulic oil from the
power unit.

Loosen two screws marked A, remove all cables and the
oli pipe
, then you can take out the power
unit
 Loosen four screws marked C and two screws markd B, then you can separate the power unit into
the motor(No.1), the mounting plate of vavle (No.4), the suction filter (No. 12), the oil tank ( No.13).
 Clean up the mounting plate for valve (No.4), etc.
 Clean up the filter by compressed air , then inspect to check if the filter is blocked or damaged. And
If the filter is blocked or damaged, it need be replaced .
 Cleaning up the oil tank, remove dust or foreign material form the oli tank
 Finally, assemble all parts.
A
B
C