OPERATION
Scout
28 (06–00)
9
To Replace the main drive belt:
1.
Remove belt from the pulleys.
2.
Replace the belt. Position belt to the right side of
the belt tightener roller (Figure 6).
FIG. 6.
To Replace the side brush belt:
1.
Remove belt from main pulley. Remove fixing pin
and let the hooks of side arm come out of the idle
toothed ring (Figure 7).
2.
Remove belt from machine.
3.
Replace the belt. Hook side arm to the idle
toothed ring. Tighten fixing pin.
4.
Place belt on main pulley.
FIG. 7.
REPLACING THE FLAPS
FOR SAFETY: When servicing machine,
disconnect battery connections before working on
machine.
To Replace Outer side flaps 1 (Figure 8):
1.
Remove the rear wheels and the appropriate side
guards.
2.
Loosen the screws that secure the flaps to frame
2 and replace the old flaps with new ones.
2
3
1
5
1
2
4
3
6
5
FIG. 8.
To Replace Inner side flaps 5 (Figure 8):
1.
Lift the front part of the machine and loosen
screws 6 that secure the flaps to the frame.
2.
Replace the old flaps with new ones.
To Replace Center flaps (Figure 8):
1.
Remove the rear wheels and the appropriate side
guards.
2.
Remove the rear door.
3.
Loosen the two flap fixing pins 3, located on the
sides of the frame.
4.
Grasp flap 4 and pull it outwards.
5.
Remount the flaps in the same direction in which
they are removed.
6.
Insert the two references in their holes.
7.
Tighten the two fixing pins.
