OPERATION
10
Scout
28 (06–00)
REPLACING THE TRACTION CABLE
FOR SAFETY: When servicing machine,
disconnect battery connections before working on
machine.
To remove the traction cable:
1.
Remove the upper cover of the machine.
2.
Loosen the security dowel located on the cable
fixing pin.
3.
Pull the cable out of the fixing pin and remove the
adjusting screw mounted on the handle.
4.
Press the handle and pull the cable out of its
sheath.
To remount the traction cable:
1.
Fit one end of the cable into the adjustment screw
of the handle (i.e. the end without the blocking
ball).
2.
Insert the cable into its sheath.
3.
Hook the blocking ball to the handle.
4.
Slot the cable through the turned adjustment
screw secured to the machine frame and then
through the fixing pin.
5.
Tighten the security dowel. The position of the
cable is adjusted by acting on the two adjustment
screws.
To Replace the side brush lifting cable:
1.
Remove the upper cover and the front waste bin
of the machine.
2.
Remove the front bumper, the right wheel and the
right hand side guard.
3.
Loosen the cable clamp.
4.
Loosen the security dowel on the fixing pin.
5.
Remove the handle from the support and open it
up.
6.
Pull the cable out of the two sheaths.
To remount the side brush lifting cable:
1.
Put the cable inside the handle.
2.
Close up the handle and fix it to its support.
3.
Insert the cables into their sheaths.
4.
Secure one end of the cables in place with the
clamp and the other end with the fixing pin. The
position of the cable is adjusted by acting on the
two adjustment screws.
REPLACING THE FAN MOTOR
To replace the fan motor:
1.
Remove the upper cover.
2.
Disconnect the battery cables and take the battery
out of the machine.
3.
Disconnect the power supply cords of the motor
from the plug.
4.
Remove the stop for the cable holder from the
motor.
5.
Loosen the four motor fixing screws. Replace the
motor by carrying out the above operations in
reverse order:
NOTE: Make sure the motor is mounted level with the
fan.
ATTENTION: When connecting the motor respect
the polarity.
RECOMMENDED STOCK ITEMS
Refer to the Parts List section for recommended stock
items. Stock Items are clearly identified with a bullet
preceding the parts description. See example below:
