OPERATION
Magna Twin
t
1600/2200/2600 (09–01)
9
ATTACHMENT TOOL OPERATION
Attachment Tool Kit is sold separately. (Attachment
Tool Kit #190048) Includes: Crevice Tool, Dusting
Brush, Upholstery Tool, 1.5m (5 ft) Vacuum Hose and
Extension Wand.
1.
Keep vacuum in the upright position at all times
when using attachments.
2.
Disconnect vacuum hose from elbow on handle
housing.
3.
Connect attachment tool vacuum hose to elbow
and desired tool to opposite end (Figure 6).
Elbow
Attachment
Tool
FIG. 6
4.
Activate ON/OFF switch and operate tool using
normal vacuuming procedures.
WARNING: Flammable materials can cause
an explosion or fire. Do not pick up.
VACUUM BAG REMOVAL/INSTALLATION
WARNING: Hazardous Voltage. Shock or
electrocution can result. Unplug machine before
servicing.
1.
Open rear door by turning door latch/upper cord
hook 90
_
(Figure 7).
Door Latch
Slide Bag
Collar Off
Intake
Spout
FIG. 7
2.
Slide vacuum bag collar off intake spout.
PAPER BAG: Dispose paper bag when full. DO
NOT reuse paper bag.
CLOTH BAG: Unclip end of bag and release
debris into disposal container. Shake out excess
dust and inspect for tears or holes.
3.
Directly replace with new or empty cloth bag. Push
bag onto intake spout as far as it will go.
MACHINE MAINTENANCE
WARNING: Hazardous Voltage. Shock or
electrocution can result. Unplug machine before
servicing.
POWER CORD:
1. Always wind power cord around cord hooks rather
than loosely looped over handle. Should power
cord become worn, replace immediately.
2.
Inspect cord strain relief regularly to ensure that it
is not pulling out of housing.
VACUUM BAG:
1. Check bag regularly for fullness. Do not over fill
bag. Never reuse paper bag.
2.
Always shake out excess dust after emptying cloth
bag. Inspect for tears and holes.
SECONDARY FILTER:
1. Clean secondary filter weekly. Filter is located
below vacuum bag area (Figure 8).
