OPERATION
EZ Rider
t
HP 330780 (4--04)
16
FUSES
The
fuses
are one-time protection devices
designed to stop the flow of current in the event of
a circuit overload.
NOTE: Always replace the fuse with a fuse of the
same amperage.
The
fuses
are in--line and located near the two
multi--pin connectors on the controller. The
controller is located behind the operator console.
Access the fuses by lowering the operator
console.
Fuse
Rating
Circuit Protected
FU-1
125 A
Machine controller
FU-2
10 A
Battery
FU-3
10 A
ES pump
FU-4
10 A
Actuator motor
FU-5
10 A
Key switch
CIRCUIT BREAKERS
Circuit breakers are resetable electrical circuit
protection devices designed to stop the flow of
current in the event of a circuit overload. Once a
circuit breaker is tripped, reset it manually by
pressing the reset button after the breaker has
cooled down. Machines equipped with the FaST
option have a 10 A circuit breaker located on the
lower part of the operator console.
If the overload that caused the circuit breaker to
trip is still present, the circuit breaker will continue
to stop current flow until the problem is corrected.
