BATTERY INSTALLATION
265XP
(03-99)
41
ÂÂÂÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂÂÂ
CABLE #1
CABLE #2
FRONT
FROM
ELECTRICAL
PANEL
Step 1:
Turn Key to OFF. This prevents any
motors from accidentally starting
when battery connections are made.
Step 2:
Carefully set batteries in
compartment and arrange battery
posts as shown.
Step 3:
Insert foam spacers between
batteries as shown and place a
translucent terminal cover over each
post.
Step 4:
Connect cables to battery posts in
order as labeled (RED to POSITIVE
& BLACK to NEGATIVE). Cover post
with rubber boot.
NOTE: Once final battery cable
connection is made the scrubber
head will automatically raise to
transport position. This is normal.
CAUTION:
Be careful not to bridge
wrench from post to post when
connecting cables. This could cause
sparking and create an explosive
hazard.
A
B
C
D
E
F
G
INSTRUCTIONS
BATTERY SPECIFICATIONS:
6 – 6 VOLT 235AMP @ 20 hr rate
FOAM SPACERS
WARNING: Batteries emit hydrogen gas. Explosion
!
FOR SAFETY: When servicing machine, wear protective gloves
when handling batteries or battery cables. Avoid contact with
battery acid.
or fire can result. Keep sparks and open flame away.
Keep battery compartment open when charging.
