OPERATION
3
265XP
(03-99)
SAFETY PRECAUTIONS
This machine is intended for industrial and
commercial use. It is suited to scrub hard floors in an
indoor environment and is not constructed for any
other use. Use only recommended pads, brushes and
cleaning detergents.
The following safety alert symbols are used
throughout this manual as indicated in their
description.
WARNING: To warn of hazards or unsafe
practices which could result in severe personal
injury or death.
FOR SAFETY: To identify actions which must be
followed for safe operation of equipment.
The following information signals potentially
dangerous conditions to the operator or equipment:
FOR SAFETY:
1.
Do not operate machine:
–
Unless trained and authorized.
–
Unless operation manual is read and
understood.
–
In flammable or explosive areas unless
designed for use in those areas.
2.
Before starting machine:
–
Make sure all safety devices are in place
and operate properly.
3.
When using machine:
–
Go slow on inclines and slippery
surfaces.
–
Use care when reversing machine.
–
Always follow safety and traffic rules.
– Report machine damage or faulty
operation immediately.
4.
Before leaving or servicing machine:
–
Stop on level surface.
–
Turn off machine.
5.
When servicing machine:
–
Avoid moving parts. Do not wear loose
jackets, shirts, or sleeves.
–
Block machine tires before jacking
machine up.
–
Use hoist or jack of adequate capacity to
lift machine.
–
Disconnect battery connections before
working on machine.
–
Wear protective gloves when handling
batteries or battery cables.
–
Avoid contact with battery acid.
–
Use manufacturer supplied or approved
replacement parts.
WARNING: Batteries emit hydrogen gas.
Explosion or fire can result. Keep sparks and
open flame away. Keep battery compartment open
when charging.
WARNING: Flammable materials can cause
an explosion or fire. Do not use flammable
materials in tank(s).
WARNING: Flammable materials or reactive
metals can cause explosion or fire. Do not pick
up.
WARNING: Moving parts. Turn off power
before working on machine.
IMPORTANT NOTICE TO OWNERS:
The foam filled tire option must be installed in place of
the solid tires when the machine is used consistently
on grouted tile floors to prevent tile damage and
excessive machine component wear. Foam filled tires
should also be used on soft surfaces such as sports
floors to reduce wheel marking of surface.
ATTENTION: Usage of solid tires in the above
conditions will void the warranty on drive system
components.
