Noblelift PT E30, Инструкция по эксплуатации

Страница: 21 / 24

20
Table 4: Size fuses
Rate
FU 10A
FU 01 60A
FU 02 60A
9. TROUBLE SHOOTING

If the truck has malfunctions follow the instructions, mentioned under chapter 6.
TROUBLE CAUSE REPAIR
Load can’t be lifted
Load weight too high Lift only the max. capacity,
mentioned on the ID-plate
Battery discharged Charge the battery
Lifting fuse faulty Check and eventually replace
the lifting fuse
Hydraulic oil level too low Check and eventually refill
hydraulic oil
Oil leakage Repair the hoses and/or the
sealing of the cylinder
Oil leakage from
air breathing
Excessive quantity of oil. Reduce oil quantity.
Load can’t be
lowered
Manual bowden cable unhooked Adjust the Bowden cable
correctly
Truck not starts
operating
Battery is charging Charge the battery completely
and then remove the main
power plug form the electrical
socket.
Battery not connected Connect the battery correctly
Fuse faulty Check and eventually replace
fuses
Low battery Charge the battery
Combined emergency switch is
activated De-activate the combined
emergency switch by insert and
pull the knob.
Tiller in the operating zone Move the tiller firstly to the
braking zone.
If the truck has malfunctions and can’t be operated out of the working zone, jack the truck
up and go with a load handler under the truck and safe the truck securely. Then move truck
out of the aisle.
Table 5: Trouble shooting