Noblelift PT E30, Инструкция по эксплуатации

Страница: 12 / 24

11
Fig. 5: Lifting with a crane
Fig. 6: fixing points
Lifting
USE DEDICATED CRANE AND LIFTING EQUIPMENT
DO NOT STAND UNDER THE SWAYING LOAD
DO NOT WALK INTO THE HAZARDOUS AREA DURING
LIFTING
Park the truck securely and lash the truck according to the
points identified in fig. 5
Lift the truck to its destination and place the truck securely
before removing the lifting gear.
The lashing points are according to the fig. 5.
Transportation
DURING TRANSPORTATION ON A LORRY OR TRUCK
ALWAYS FASTEN THE TRUCK SECURELY
Lower the forks and park the truck securely.
Fasten the truck according to fig. 6 by slinging dedicated
lashing belts around both sides of the trucks torsion
arms and fasten the other side at the transporting truck.
c.
Decommissioning
For storage, remove the load, lower the truck to the lowest position, grease all in this
handbook mentioned greasing points (regular inspection), eventually protect the truck
against corrosion and dust. Remove the batteries and jack the truck safety, so that there
will be no flattening after storage.
For final decommissioning hand the truck to a designated recycling company. Oil,
batteries and electric components must be recycled due to legal regulations.
5. DAILY INSPECTION
This chapter describes pre-shift checks before putting the truck into operation.
Daily inspection is effective to find the malfunction or fault on this truck. Check the truck
on the following points before operation.
Remove load from truck and lower the forks.
DO NOT USE THE TRUCK IF ANY MALFUNCTIOJN IS FOUND.

Check for scratches, deformation or cracks.

Check if there is any oil leakage from the cylinder.

Check the vertical creep of the truck.