Noblelift PS35LSL, Инструкция по эксплуатации

Страница: 23 / 28

22
20 Test the display

21 Check if correct fuses are used, if necessary replace.

22 Test the audio warning signal

23 Check the contactors

24 Check the frame leakage (insulation test)

25 Check function and wear of the accelerator

26 Check the electrical system of the drive motor

Braking system
27 Check brake performance, if necessary replace the brake disc or adjust the air
gap

Battery
28 Check the battery voltage

29 Clean and grease the terminals and check for corrosion and damage

30 Check the battery housing for damages

Charger
31 Check the main power cable for damages

32 Check the start-up protection during charging

Function
33 Test the audio warning signal

34 Check the air gap of the electromagnetic brake

35 Test the emergency braking

36 Test the reverse and regenerative braking

37 Test the safety (belly) button function

38 Check the steering function

39 Check the lifting and lowering function

40 Check the tiller arm switch function

41 Test the key switch of damages and function

42 Test the speed limitation switch (lifting height >~12”)

General
43 Check if all decals are legible and complete

44 Check if the protective screen and or guarding is not damaged

45 Inspect the castor, adjust the height or replace it, if worn out

46 Carry out a test run

b.
Lubricating points
Lubricate the marked points according to the maintenance checklist.
The required grease specification is: DIN 51825, standard grease.
Fig. 19: Lubricating points
1 Bearings in wheels
2 Main frame post
3 Chain
4 Hydraulic system
5 Steering bearing