Noblelift PS35LSL, Инструкция по эксплуатации

Страница: 15 / 28

14
c.
Decommissioning
For storage, remove the load, lower the truck to the lowest position, grease all in this handbook
mentioned greasing points (regular inspection), eventual protect the truck against corrosion and dust.
Remove the batteries and jack the truck safely, so that there will be no flattening after storage.
For final decommissioning hand the truck to a designated recycling company. Oil, batteries and electric
components must be recycled due to legal regulations.
5. DAILY INSPECTION
This chapter describes pre-shift checks before putting the truck into operation.
Daily inspection is effective to find the malfunction or fault on this truck. Check the truck on the following
points before operation.
Remove load from truck and lower the forks.
DO NOT USE THE TRUCK IF ANY MALFUNCTION IS FOUND.

Check for scratches, deformation or cracks.

Check if there is any oil leakage from the cylinder.

Check the vertical creep of the truck.

Check the chain and rollers for damages or corrosion.

Check the smooth movement of the wheels.

Check the function of the emergency brake by activating the emergency button.

Check, the tiller arm- switch braking function

Check the lifting and lowering functions by operating the buttons.

Check if the protective screen has no damages and that is correctly assembled.

Check the audio warning signal.

Check if all bolts and nuts are tightened firmly.

Check the function of the key switch.

Check the speed limitation switch.

Visual check if there are any broken hoses or broken electric wires.

If supplied with a backrest extension, check it for damages and
correct assembling.
6. OPERATING INSTRUCTIONS
BEFORE OPERATING THIS TRUCK, PLEASE FOLLOW
THE WARNINGS AND SAFETY INSTRUCTIONS
(CHAPTER 3).
BEFORE OPERATING THIS TRUCK, ENSURE THAT THE
LOAD OR OTHER EQUIPMENT NOT CAUSES
INSUFFICIENT VISIBILITY!
Make sure, that the load is palletized and stable and that the daily
3
4
22
23
Fig.7: Tiller operating controls
Fig.8: Key switch