Noblelift FE4P16-20 Q Series, Руководство по эксплуатации

Страница: 60 / 67

59
The external current flows from the negative to the positive electrode, causing the
lithium ion in the positive electrode to Li+ out of the lithium iron phosphate lattice,
passing through the diaphragm to the negative electrode, and embedded in the
layered structure of the negative electrode of the carbon material.
During discharging:
The lithium ion Li+ in the negative electrode is removed from the carbon material
layer and moves to the positive electrode through the diaphragm and is embedded in
the lattice of the positive material, and accordingly, the current flows from the positive
electrode to the negative electrode through an external load.
3. Charging operation instructions for lithium batteries
Caution: safety precautions before charging
Please choose to charge in a relatively safe environment (avoid liquid, fire, etc.
extreme environment)
Please keep necessary fire extinguishing equipment (dry powder fire extinguisher)
near the charger, emergency firefighting can be carried out in extreme cases
Please make sure there is no dust, water or other articles in the charging plug and
charging socket before charging, if there is any, please clean it before charging,
otherwise it will lead to the bad connection between the charging plug and charging
socket, cause heat and even cause a fire.
Do not modify and disassemble the charging port and charging equipment, which
may lead to charging failure and fire. According to the characteristics of the battery,
the battery capacity within warranty period should reduce from 0% to 25%.

Charging operation steps:
1) The forklift stops stable and turn off the key switch
The forklift is stationary and ensures that the key switch in the charging vehicle is
in a turn-off position. Open charging door and protective cover.
2) Socket port check
Take off the charging gun from the charger, check the charging gun and the
lithium battery charging socket on the vehicle, make sure there is no water or other
articles in the port, and the metal terminal is not damaged or affected by rust or