Noblelift FE4P16-20 Q Series, Руководство по эксплуатации

Страница: 11 / 67

10
·Do not startup or brake suddenly to prevent cargo falling down .
(2) Speed slow down
Release accelerator slowly. If necessary, step brake pedal down. Except emergency brake,
release accelerator to make slow down slowly until parking. If even release accelerator suddenly,
emergency brake is also impossible. When emergency situation, step brake pedal down to make
emergency brake.
·Please slow down if situation as follow:
(a) urning at crossing.
(b) Closing to cargo or pallet.
(c) Closing to goods pile.
(d) Traviling through narrow chunnel.
(e) Ground/Road surface is bad.
· When backing forklift you have to look at rear direction to be sure condition is safe.
It is dangerous when backing forklift depending only on rearview mirrow.
(3) Turning
It is not same as car, forklift depend on rear wheel to turn. When turning you shall be slow
down and be careful for tail swing of forklift when operating steering wheel.
·During turning, when turning radius is small, the fast speed the forklift is, the more
possibility the forklift overturn. Be careful for this situation.
(4) Traveling and lifting simultaneously (Inching operation)
(a) Traveling first, let fork prong be close to goods about 3—5m distance.
(b) Step brake pedal down perfectly.(standstill)
(c) Step accelerator down to be in optimum speed.
(d) Operating lift and lowering handle to operate fork
to be lifting operation.
· Traveling and lifting simultaneously (Inching
operation) is a professional work to ask forskilled
operator. Be definite to know well the shape and cg of
goods to identify the vehicle stability, make a slow
lifting and lowering performance of the vehicle,and
please be careful in operation.
·Tilting fork to operate when fork is at a much
height is very dangerous , except for fork’s in and out
operation , please do not operate the vehicle on the load stage.
·
In order to reduce the danger of tilting fork to operate when fork is at a much
height,make lifting operation when the vehicle is very close to load stage.
8. Parking and temporary parking
·Parking safely
·Parking place shall be broad and level as much as possible.
·When unladed forklift have to park on ramp,
please make mast face downward and block wheel
by wedge.
·Parking vehicle outside workplace or qualified
place.
·If necessary, to use signs or signal light.
·Parking on firm and level ground.
·If fork can not lower because of fault, hang