Noblelift FE4P16-20 Q Series, Руководство по эксплуатации

Страница: 45 / 67

44
·Stop the truck at the specified location.
·Pull the parking brake handle.
·Press the emergency stop switch.
·Turn off the key switch and remove the key.
·Disconnect the battery plug.
1. Truck surface cleaning .
·Do not use flammable liquid to clean trucks, take safety measures to prevent short
circuit.
· Use water and soluble detergent to clean the truck.
· Clean the oil filler and periphery of grease tap carefully.

If regular cleaning truck, please lubricate timely.
2. Chains cleaning
·Do not use chemical detergent, acids or other corrosive liquid to clean the chain.
· Place a tank in the bottom of the frame.
· Use gasoline or other petrochemical derivatives to clean the chain.
· Do not add any additive when use the steam nozzle cleaning.
· Dry immediately after cleaning of the chain pin and the water stain on chain surface.
3. Electric system cleaning
·Do not use water to clean the pump control and a variety of connectors, so as not to
cause damage to electrical systems.
Use non-metallic brush or low-power hair dryer, according to the manufacturer instructions to
clean the electrical system; do not move the protective cover.
4. After cleaning
· Thoroughly dry water stains on the truck (use compressed air as a example).
· Start the forklift according to the procedures.
·If moisture penetration into the motor, you must first remove the moisture, to prevent
short circuits

Moisture will reduce brake performance, brake truck briefly to drying the brake.
Ⅳ、
Regular maintenance
· Thoroughly dry water stains on the truck (use compressed air as a example).
· Start the forklift according to the procedures.
·If moisture penetration into the motor, you must first remove the moisture, to prevent
short circuits

Moisture will reduce brake performance, brake truck briefly to drying the brake.
1. Regular maintenance schedule
√
—Check , calibration, adjustment ×—Change
(1) Battery