manualshive.com logo in svg

Noble UH30-E, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Noble UH30-E Скачать руководство пользователя страница 3

i

UH30-E

Undercounter dishmachine; high-temperature, hot-water 

sanitizing, with a booster tank and detergent 

and rinse-aid chemical feeder pumps.

UH30-E-SEER

Undercounter dishmachine; high-temperature, hot-water 

sanitizing, with a booster tank and detergent 

and rinse-aid chemical feeder pumps.  Equipped with Steam 

Elimination and Energy Recovery System (SEER).

The manufacturer provides 

technical support for all of 

the dishmachines detailed 

in this manual. We strongly  

recommend that you refer to 

this manual before making a 

call to our technical support 

staff. Please have this manual 

open when you call so that our 

staff can refer you, if necessary, 

to the proper page. Technical 

support is not available on  

holidays. 

Contact technical support toll 

free at 1-888-800-5672. 

Technical support is available 

for service personnel only.  

NOMENCLATURE

Содержание UH30-E



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды