manualshive.com logo in svg

Noble UH30-E, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Noble UH30-E Скачать руководство пользователя страница 25

07610-004-45-09-D

20

PREVENTATIVE MAINTENANCE

MAINTENANCE

The manufacturer of this machine highly recommends that any maintenance and 

repairs not specifically discussed in this manual only be performed by qualified service 
personnel. Performing maintenance on the machine may void a warranty.

By following the operating and cleaning instructions in this manual, users should get 
the most efficient results from the machine. As a reminder, here are some steps to 
ensure that the machine is used properly:

1. 

Ensure that the water temperatures match those listed on the machine data 

plate (on the front-left of machine). 

2. 

Remove as much soil as possible from ware before loading into racks.

3. 

Ensure that strainers are in place, laying flat in tub, and free of soil and debris 
before operating the machine. To clean strainers, wipe them out with a rag and 

rinse under a faucet. For stubborn debris, a toothpick can be used. Do not beat 

strainers on waste cans; once bent, they will not work properly. 

4. 

Ensure that all wash and rinse arms are secure in the machine before operating.

PREVENTATIVE 

MAINTENANCE

i

Содержание UH30-E



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды