noble pro Elite E8.0, Руководство пользователя

Страница: 19 / 24

Rev2.0 19 noble-pro.com
E
rr
or
C
od
es
--- or -----
A Missing safety key Place the safety key in the
designated area
B Faulty magnetic sensor The safety key magnetic
sensor is stuck. Repair or
replace magnetic sensor.
E01 & E13 -
Communication
failure
A Communication cable faulty Reconnect the
communication cables
B Damaged communication cable Replace communication
cable
C Communication cable connection
faulty
Replace effected cables
D IC drive cable faulty Replace the IC drive cable
E02 - Motor stalls
A Loose motor connection cables Check wire connections
are tight or replace the
motor
B Motor controller board faulty Replace the IC drive
C External ac voltage is too low Undertake electrical
supply troubleshooting
where the treadmill is
plugged in
E04 - Inline motor
stalling
A Faulty incline motor connection Check wire connections
are tight or replace the
motor
B Faulty incline motor Replace incline motor
C Faulty IC drive Replace the IC drive
E05 & E10 - Over-
current protection
A Treadmill overloaded Rotate the motor by hand
and safely try again
B Excessive friction in driver motors Inspect and maintain
transmission components
C Motors damaged Replace motor
D Motor controller damaged Replace IC drive
E06 - Motor error
A Motor cable connection faulty plug machine line again
B Motor is shorting internally change the motor
C Motor is idling The motor current is too
low. Replace the motor